Cisco SPS2024 - Show Lacp Port-Channel

LACP Commands
show lacp port-channel
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 240
17
e1 LACP Statistics:
ACP PDUs sent: 2
LACP PDUs received: 2
e1 LACP Protocol State:
LACP State Machines:
Receive FSM: Port Disabled State
Mux FSM: Detached State
Periodic Tx FSM: No Periodic State
Control Variables:
BEGIN: FALSE
LACP_Enabled: TRUE
Ready_N: FALSE
Selected: UNSELECTED
Port_moved: FALSE
NNT: FALSE
Port_enabled: FALSE
Timer Counters
periodic tx timer: 0
current while timer: 0
wait while timer: 0
show lacp port-channel
The show lacp port-channel Privileged EXEC mode command displays LACP
information for a port-channel.
Syntax
show lacp port-channel [ port_channel_number ]
Parameters
•
port_channel_number — Valid port-channel number.