LACP Commands
show lacp ethernet
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 239
17
Example
The following example display LACP information for Ethernet port e1.
Console# show lacp ethernet e1
e1 LACP parameters:
Actor
system priority: 1
system mac addr: 00:00:12:34:56:78
port Admin key: 30
port Oper key: 30
port Oper number: 21
port Admin priority: 1
port Oper priority: 1
port Admin timeout: LONG
port Oper timeout: LONG
LACP Activity: ACTIVE
Aggregation: AGGREGATABLE
synchronization: FALSE
collecting: FALSE
distributing: FALSE
expired: FALSE
Partner
system priority: 0
system mac addr: 00:00:00:00:00:00
port Admin key: 0
port Oper key: 0
port Oper number: 0
port Admin priority: 0
port Oper priority: 0
port Oper timeout: LONG
LACP Activity: PASSIVE
Aggregation: AGGREGATABLE
synchronization FALSE
collecting: FALSE
distributing: FALSE
expired: FALSE
To Next Page
Loading...
