Cisco SPS2024 - Show Rmon Alarm

RMON Commands
show rmon alarm
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 326
25
Index OID Owner
----- ---------------- ------
1 1.3.6.1.2.1.2.2.1.10.1 CLI
2 1.3.6.1.2.1.2.2.1.10.1 Manager
3 1.3.6.1.2.1.2.2.1.10.9 CLI
The following table describes significant fields shown in the example:
show rmon alarm
The show rmon alarm Privileged EXEC mode command displays alarm
configuration.
Syntax
show rmon alarm number
Parameters
•
number — Specifies the alarm index. (Range: 1-65535)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Field Description
Index An index that uniquely identifies the entry.
OID Monitored variable OID.
Owner The entity that configured this entry.