Cisco SPS2024 - Show Interfaces Configuration

Ethernet Configuration Commands
show interfaces configuration
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 166
12
Example
The following example reactivates interface 1.
Console# set interface active ethernet 1
show interfaces configuration
The show interfaces configuration Privileged EXEC mode command displays the
configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-
number
]
Parameters
•
interface — Valid Ethernet port.
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.