Cisco SPS2024 - End

User Interface Commands
end
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 466
33
User Guidelines
There are no user guidelines for this command.
Example
The following example closes an active terminal session.
Console> exit
end
The end command ends the current configuration session and returns to the
Privileged EXEC mode.
Syntax
end
Default Configuration
This command has no default configuration.
Command Mode
All configuration modes.
User Guidelines
There are no user guidelines for this command.
Example
The following example changes from Global Configuration mode to Privileged
EXEC mode.