Cisco SPS2024 - Ip Domain-Lookup

IP Address Commands
ip domain-lookup
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 218
15
VLAN IP Address HW AddressStatus
------ ----------- ----------------------
VLAN 1 10.7.1.102 00:10:B5:04:DB:4B
Dynamic
VLAN 1 10.7.1.135 00:50:22:00:2A:A4Static
ip domain-lookup
The ip domain-lookup Global Configuration mode command enables the IP
Domain Naming System (DNS)-based host name-to-address translation. Use the
no form of this command to disable DNS-based host name-to-address translation.
Syntax
ip domain-lookup
no ip domain-lookup
Default Configuration
IP Domain Naming System (DNS)-based host name-to-address translation is
enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables IP Domain Naming System (DNS)-based host
name-to-address translation.
Console(config)# ip domain-lookup