8
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 129
DHCP Commands
ip dhcp snooping
The ip dhcp snooping Global Configuration mode command globally enables
DHCP snooping. Use the no form of this command to return to the default
configuration.
Syntax
ip dhcp snooping
no ip dhcp snooping
Default Configuration
The default configuration is set to disabled.
Command Mode
Global Configuration mode
User Guidelines
For any DHCP snooping configuration to take effect, DHCP snooping must be
globally enable. DHCP snooping is not active until you enable snooping on a VLAN
by using the ip dhcp snooping vlan Global Configuration mode command.
Example
The following example enables DHCP snooping.
Console(config)# ip dhcp snooping
To Next Page
Loading...
