Cisco SPS2024 - Show Running-Config

Configuration and Image File Commands
show running-config
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 126
7
Examples
The following example deletes the startup-config file.
Console# delete startup-config
show running-config
The show running-config Privileged EXEC mode command displays the contents
of the currently running configuration file.
Syntax
show running-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
•
show running-config does not show all the port configurations under the
port. Although the device is already configured with some default
parameters, ‘show running config’ on an empty device is empty.
Examples
The following example displays the contents of the running-config file.
Console# show running-config
no spanning-tree
vlan database
vlan 2