Cisco SPS2024 - Chapter 14: IGMP Snooping Commands; Ip Igmp Snooping (Global)

14
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 192
IGMP Snooping Commands
ip igmp snooping (global)
The ip igmp snooping Global Configuration mode command enables Internet
Group Management Protocol (IGMP) snooping. Use the no form of this command
to disable IGMP snooping.
Syntax
ip igmp snooping
no ip igmp snooping
Default Configuration
IGMP snooping is disabled.
Command Mode
Global Configuration mode
User Guidelines
IGMP snooping can only be enabled on static VLANs. It must not be enabled on
Private VLANs or their community VLANs.
Example
The following example enables IGMP snooping.
Console(config)# ip igmp snooping