TACACS+ Commands
show tacacs
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 461
32
show tacacs
The show tacacs Privileged EXEC mode command displays configuration and
statistical information about a TACACS+ server.
Syntax
show tacacs [
ip-address
]
Parameters
•
ip-address
— Name or IP address of the TACACS+ server.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays configuration and statistical information about a
TACAC S+ s er ver.
Console# show tacacs
Device Configuration
--------------------
IP address Status Port Single Connection TimeOut Source IPPriority
---------- --------- ---- ----------------- ------- -----------------
172.16.1.1 Connected 48 No Global Global 1
To Next Page
Loading...
