Cisco SPS2024 - Chapter 6: Clock Commands; Clock Set

6
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 100
Clock Commands
clock set
The clock set Privileged EXEC mode command manually sets the system clock.
Syntax
clock set hh:mm:ss day month year
or
clock set
hh:mm:ss month day year
Parameters
•
hh:mm:ss — Current time in hours (military format), minutes, and seconds.
(hh: 0-23, mm: 0-59, ss: 0-59)
• day — Current day (by date) in the month. (Range: 1-31)
• month — Current month using the first three letters by name. (Range: Jan, …,
Dec)
• year — Current year. (Range: 2000-2097)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode