User Interface Commands
configure
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 464
33
configure
The configure Privileged EXEC mode command enters the Global Configuration
mode.
Syntax
configure
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Global Configuration mode.
Console# configure
Console(config)#
exit (configuration)
The exit command exits from any configuration mode to the next highest mode in
the CLI mode hierarchy.
Syntax
exit
To Next Page
Loading...
