Cisco SPS2024 - Show Access-Lists

ACL Commands
show access-lists
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 61
3
Syntax
service-acl input acl-name1
no service-acl input
Parameters
acl-name — Specifies an ACL to apply to the interface. Please see the usage
guidelines.
Default Configuration
No ACL is assigned.
Command Mode
Interface configuration (Ethernet, Port-Channel).
Usage Guidelines
•
Two ACLs of the same type can’t be added to a port.
• An ACL can’t be added to a port that is already bounded to an ACL, without
first removing the current ACL and binding the two ACLs together.
show access-lists
The show access-lists Privileged EXEC mode command displays access control
lists (ACLs) defined on the device.
Syntax
show access-lists [ name ]
Parameters
•
name — The name of the ACL.