Cisco SPS2024 - Show Interfaces Counters

Ethernet Configuration Commands
show interfaces counters
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 171
12
Example
The following example displays descriptions of configured interfaces.
Console# show interfaces description
Port Description
---- -----------
e1 lab
e2
e3
e4
e5
e6
ch1
ch2
show interfaces counters
The show interfaces counters Privileged EXEC mode command displays traffic
seen by the physical interface.
Syntax
show interfaces counters [ethernet interface | port-channel port-channel-number ]
Parameters
•
interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.