Cisco SPS2024 - Revision (Mst)

Spanning Tree Commands
revision (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 388
28
Example
The following example defines the configuration name as region1.
Console(config) # spanning-tree mst_configuration
Console(config-mst) # name region1
revision (mst)
The revision MST Configuration mode command defines the configuration revision
number. Use the no form of this command to restore the default configuration.
Syntax
revision value
no revision
Parameters
•
value — Configuration revision number (Range: 0-65535).
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.