Cisco SPS2024 - Key-String

SSH Commands
key-string
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 408
29
User Guidelines
Follow this command with the key-string SSH Public Key-String Configuration
mode command to specify the key.
Example
The following example enables manually configuring an SSH public key for SSH
public key-chain bob.
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)# user-key bob rsa
Console(config-pubkey-key)# key-string row
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl
key-string
The key-string SSH Public Key-string Configuration mode command manually
specifies an SSH public key.
Syntax
key-string
key-string row
key-string
Parameters
•
row — Indicates the SSH public key row by row.
• key-string — Specifies the key in UU-encoded DER format; UU-encoded
DER format is the same format in the authorized_keys file used by
OpenSSH. (Range:0-160)
Default Configuration
No keys exist.