Address Table Commands
show bridge multicast address-table
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 92
5
Secure addresses: 2
Static addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show bridge multicast address-table
The show bridge multicast address-table Privileged EXEC mode command
displays Multicast MAC address or IP Address Table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-
multicast-address | ip-multicast-address] [format ip | format
mac
Parameters
•
vlan-id —
Indicates the VLAN ID. This has to be a valid VLAN ID value.
•
mac-multicast-address —
A valid MAC Multicast address.
•
ip-multicast-address
— A valid IP Multicast address.
• format ip / mac — Multicast address format. Can be ip or ac. If the format is
unspecified, the default is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
