Address Table Commands
show bridge multicast address-table
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 93
5
User Guidelines
A MAC address can be displayed in IP format only if it is in the range of
0100.5e00.0000-0100.5e7f.ffff.
Example
In this example, Multicast MAC address and IP Address Table information are
displayed.
Console# show bridge multicast address-table
Vlan MAC Address Type Ports
---- -------------- ------- ---------
1 01:00:5e:02:02:03 static e1, e13
19 01:00:5e:02:02:08 static e1-e8
19 00:00:5e:02:02:08 dynamic e9-e11
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---- -------------- -----
1 01:00:5e:02:02:03 e16
19 01:00:5e:02:02:08 e16
Console# show bridge multicast address-table format ip
Vlan IP/MAC Address Type Ports
---- ----------------- ------- ---------
1 224-239.130|2.2.3 static e1, e13
19 224-239.130|2.2.8 static e1-e8
19 224-239.130|2.2.8 dynamic e9-e11
Forbidden ports for multicast addresses:
Vlan IP/MAC Address Ports
---- -------------- -----
1 224-239.130|2.2.3 e16
19 224-239.130|2.2.8 e16
To Next Page
Loading...
