Cisco SPS2024 - Show Gvrp Configuration

GVRP Commands
show gvrp configuration
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 188
13
Example
The following example clears all GVRP statistical information on Ethernet port 1.
Console# clear gvrp statistics ethernet 1
show gvrp configuration
The show gvrp configuration Privileged EXEC mode command displays GVRP
configuration information, including timer values, whether GVRP and dynamic
VLAN creation is enabled, and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface |port-channel port-channel-number ]
Parameters
•
interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.