Cisco SPS2024 - Chapter 35: Web Server Commands; Ip Http Server

35
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 506
Web Server Commands
ip http server
The ip http server Global Configuration mode command enables configuring the
device from a browser. Use the no form of this command to disable this function.
Syntax
ip http server
no ip http server
Default Configuration
HTTP server is enabled.
Command Mode
Global Configuration mode
User Guidelines
Only a user with access level 15 can use the Web server.
Example
The following example enables configuring the device from a browser.
Console(config)# ip http server