SNMP Commands
show snmp
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 353
26
show snmp
The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP communications status.
Console# show snmp
Community- Community- View name IP
String Access address
---------- ----------- --------- --------
public read only user-view All
private read write Default 172.16.1.1
private se DefaultSuper 172.16.1.1
Community-string Group name IP address Type
---------------- ----------- ---------
public user-group all
To Next Page
Loading...
