802.1x Commands
show dot1x
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 528
36
show dot1x
The show dot1x Privileged EXEC mode command displays the 802.1x status of the
device or specified interface.
Syntax
show dot1x [ethernet
interface
]
Parameters
•
interface —
Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of 802.1x-enabled Ethernet ports.
Console# show dot1x
802.1x is enabled
Port Admin Mode Oper Mode Reauth Reauth Username
Control Period
---- ---------- --------- ------- ------ --------
e1 Auto Authorized Ena 3600 Bob
e2 Auto Authorized Ena 3600 John
To Next Page
Loading...
