Cisco SPS2024 - Interface Range Port-Channel

Port Channel Commands
interface range port-channel
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 261
21
Example
The following example enters the context of port-channel number 1.
Console(config)# interface port-channel 1
interface range port-channel
The interface range port-channel Global Configuration mode command enters the
Global Configuration mode to configure multiple port-channels.
Syntax
interface range port-channel { port-channel-range | all}
Parameters
•
port-channel-range — List of valid port-channels to add. Separate
nonconsecutive port-channels with a comma and no spaces. A hyphen
designates a range of port-channels. (Range: 1-64)
• all — All valid port-channels.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on
each interface in the range.