Cisco SPS2024 - Spanning Tree Commands

Spanning Tree Commands
show spanning-tree
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 394
28
Name State Prio.Nbr Cost Sts Role PortFast Type
---- ------- -------- ----- --- ---- -------- ----------
e1 Enabled 128.1 20000 FWD Desg No P2p (RSTP)
e2 Enabled 128.2 20000 FWD Desg No Shared (STP)
e3 Disabled 128.3 20000 - - - -
e4 Enabled 128.4 20000 FWD Desg No Shared (STP)
e5 Enabled 128.5 20000 DIS - - -
Console# show spanning-tree
Spanning tree disabled (BPDU filtering) mode RSTP
Default port cost method: long
Root ID Priority N/A
Address N/A
Path Cost N/A
Root Port N/A
Hello Time N/A Max Age N/A Forward Delay N/A
Bridge ID Priority 36864
Address 00:02:4b:29:7a:00
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Interfaces
Name State Prio.Nbr Cost Sts Role PortFast Type
---- ------- -------- ----- --- ---- -------- ----
e1 Enabled 128.1 20000 - - - -
e2 Enabled 128.2 20000 - - - -
e3 Disabled128.3 20000 - - - -
e4 Enabled 128.4 20000 - - - -
e5 Enabled 128.5 20000 - - - -
Console# show spanning-tree active
Spanning tree enabled mode RSTP
Default port cost method: long