Cisco SPS2024 - Username

AAA Commands
username
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 45
2
username
The username Global Configuration mode command creates a user account in the
local database. To remove a user name, use the no form of this command.
Syntax
username name [password password ] [evel level ] [encrypted]
no username
name
Parameters
•
name — The name of the user. (Range: 1-20 characters)
• password — The authentication password for the user. (Range: 1-159
characters)
• level — The user level (Range: 1-15). If a level is not specified, the level is
automatically set to 1.
• encrypted — Encrypted password entered, copied from another device
configuration.
Default Configuration
No user is defined.
Command Mode
Global Configuration mode
User Guidelines
User account can be created without a password.