Cisco SPS2024 - Show Logging

Syslog Commands
show logging
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 431
30
Console(config)# management logging deny
show logging
The show logging Privileged EXEC mode command displays the state of logging
and the syslog messages stored in the internal buffer.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the state of logging and the syslog messages
stored in the internal buffer.
Console# show logging
Logging is enabled.
Console logging: level debugging. Console Messages: 0 Dropped (severity).
Buffer logging: level debugging. Buffer Messages: 11 Logged, 200 Max.
File logging: level notifications. File Messages: 0 Dropped (severity).
Syslog server 192.180.2.27 logging: errors. Messages: 6 Dropped (severity).
Syslog server 192.180.2.28 logging: errors. Messages: 6 Dropped (severity).
2 messages were not logged (resources)
Application Filtering Control