Cisco SPS2024 - Chapter 28: Spanning Tree Commands; Spanning-Tree

28
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 365
Spanning Tree Commands
spanning-tree
The spanning-tree Global Configuration mode command enables spanning-tree
functionality. Use the no form of this command to disable the spanning-tree
functionality.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
Console(config)# spanning-tree