Cisco SPS2024 - Show Interfaces Switchport

VLAN Commands
show interfaces switchport
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 504
34
Source ports Receiver Ports
------------- ----------------------
e8, e9 e1-e4, e12-e18, e22-e24
show interfaces switchport
The show interfaces switchport Privileged EXEC mode command displays the
switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-
number
}
Parameters
•
interface — A valid Ethernet port number.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.