Cisco SPS2024 - Abort (Mst)

Spanning Tree Commands
abort (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 391
28
Example
The following example exits the MST Configuration mode and saves changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # exit
Console(config) #
abort (mst)
The abort MST Configuration mode command exits the MST Configuration mode
without applying the configuration changes.
Syntax
abort
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST Configuration mode without saving changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # abort