Cisco SPS2024 - Service Cpu-Utilization

System Management Commands
service cpu-utilization
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 448
31
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the device host name.
Console(config)# hostname enterprise
enterprise(config)#
service cpu-utilization
The service cpu-utilization Global Configuration mode command enables
measuring CPU utilization. Use the no form of the command to restore the default
configuration.
Syntax
service cpu-utilization
no service cpu-utilization
Default Configuration
Enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.