System Management Commands
show users
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 450
31
show users
The show users Privileged EXEC mode command displays information about the
active users.
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
Console# show users
Username Protocol Location
-------- ---------- -----------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
To Next Page
Loading...
