23
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 268
QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on
the device. Use the no form of this command to disable QoS on the device.
Syntax
qos [basic | advanced]
no qos
Parameters
•
basic — QoS basic mode.
• advanced — QoS advanced mode, which enables the full range of QoS
configuration.
Default Configuration
The QoS basic mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
In advanced mode the VPT of the frame might be changed to egress_queue*2.
To Next Page
Loading...
