Cisco SPS2024 - Show Snmp Users

SNMP Commands
show snmp users
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 359
26
Example
The following example displays the configuration of filters.
Console# show snmp filters
Name OID Tree Type
------------ ------------------- -----
user-filter 1.3.6.1.2.1.1 Included
user-filter 1.3.6.1.2.1.1.7 Excluded
user-filter 1.3.6.1.2.1.2.2.1.*.1 Included
show snmp users
The show snmp users Privileged EXEC mode command displays the configuration
of users.
Syntax
show snmp users [ username ]
Parameters
•
username— Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.