Cisco SPS2024 - Show Bridge Multicast Filtering

Address Table Commands
show bridge multicast filtering
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 95
5
Example
Console# show bridge multicast address-table static
MAC-GROUP Table
Vlan MAC Address Type Ports
---- -------------- ------- -----------
1 0100.9923.8787 static e1, e2
Forbidden ports for Multicast addresses:
Vlan MAC Address Ports
---- -------------- -----
show bridge multicast filtering
The show bridge multicast filtering Privileged EXEC mode command displays the
Multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id
Parameters
•
vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.