Cisco SPS2024 - Shutdown

Ethernet Configuration Commands
shutdown
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 152
12
shutdown
The shutdown Interface Configuration (Ethernet, port-channel) mode command
disables an interface. Use the no form of this command to restart a disabled
interface.
Syntax
shutdown
no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example disables Ethernet port e5 operations.
Console(config)# interface ethernet e5
Console(config-if)# shutdown
The following example restarts the disabled Ethernet port.
Console(config)# interface ethernet e5
Console(config-if)# no shutdown