VLAN Commands
vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 481
34
Example
The following example enters the VLAN database mode.
Console(config)# vlan database
Console(config-vlan)#
vlan
The vlan VLAN Database mode command creates a VLAN. Use the no form of this
command to delete a VLAN.
Syntax
vlan
vlan-range
no vlan
vlan-range
Parameters
•
vlan-range
— Specifies a list of VLAN IDs to be added. Separate
nonconsecutive VLAN IDs with a comma and no spaces; a hyphen
designates a range of IDs. (Range: 2-4094)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
