13
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 182
GVRP Commands
gvrp enable (Global)
GARP VLAN Registration Protocol (GVRP) is an industry-standard protocol
designed to propagate VLAN information from device to device. With GVRP, a
single device is manually configured with all desired VLANs for the network, and
all other devices on the network learn these VLANs dynamically.
The gvrp enable Global Configuration mode command enables GVRP globally.
Use the no form of this command to disable GVRP on the device.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
