Ethernet Configuration Commands
show interfaces advertise
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 169
12
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays auto-
negotiation data.
Syntax
show interfaces advertise [ethernet
interface
| port-channel
port-channel-number
]
Parameters
•
interface —
Valid Ethernet port.
•
port-channel-number
— Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays auto-negotiation information.
Console# show interfaces advertise
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
1 100M-Copper Enabled --
2 100M-Copper Enabled --
3 100M-Copper Enabled --
4 100M-Copper Enabled --
To Next Page
Loading...
