Cisco SPS2024 - Page 170

Ethernet Configuration Commands
show interfaces status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 168
12
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of all configured interfaces.
Console# show interfaces status
Port Type Duplex Speed Neg Flow Link Back Mdix
Ctrl State Pressure Mode
---- ---------- ----------- ------- ---- ----- -------- ----
1 100M-Copper -- -- -- -- Down -- --
2 100M-Copper -- -- -- -- Down -- --
3 100M-Copper -- -- -- -- Down -- --
4 100M-Copper -- -- -- -- Down -- --
5 100M-Copper Full 100 Enabled -- Up Disabled Auto
6 100M-Copper -- -- -- -- Down -- --
7 100M-Copper -- -- -- -- Down -- --
8 100M-Copper -- -- -- -- Down -- --
9 100M-Copper -- -- -- -- Down -- --
10 100M-Copper -- -- -- -- Down -- --
11 100M-Copper -- -- -- -- Down -- --
12 100M-Copper -- -- -- -- Down -- --