QoS Commands
show qos
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 269
23
Example
The following example enables QoS on the device.
Console(config)# qos basic
show qos
The show qos Privileged EXEC mode command displays the quality of service
(QoS) mode for the device.
Syntax
show qos
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Trust mode is displayed if QoS is enabled in basic mode.
Example
The following example displays QoS attributes when QoS is enabled in basic
mode on the device.
Console# show qos
Qos: basic
Basic trust: vpt
To Next Page
Loading...
