ARP Inspection Commands
show ip arp inspection list
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 73
4
Example
The following example displays the ARP inspection configuration.
Console# show ip arp inspection
IP ARP inspection is enabled.
IP ARP inspection is configured on following VLANs: 2, 7-18
Verification of packet header is enabled
Syslog messages interval: 5 seconds
InterfaceTrusted
----------------
e1yes
e2no
show ip arp inspection list
The show ip arp inspection list Privileged EXEC mode command displays the
static ARP binding list.
Syntax
show ip arp inspection list
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
