ARP Inspection Commands
ip mac
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 69
4
Example
The following example creates a static ARP binding list and to enter the ARP list
configuration mode.
Console(config)# ip arp inspection list create
ip mac
The ip mac ARP-list Configuration mode command displays static ARP binding. To
delete a binding, use the no form of this command.
Syntax
ip
ip-address
mac
mac-address
no ip
ip-address
mac
mac-address
Parameters
•
ip-address —
Specifies the IP address to be entered to the list.
•
mac-address —
Specifies the MAC address associated with the IP
address.
Default Configuration
No binding is defined.
Command Mode
ARP-list Configuration mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
