Cisco SPS2024 - Tacacs-Server Key

TACACS+ Commands
tacacs-server key
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 458
32
tacacs-server key
The tacacs-server key Global Configuration mode command sets the
authentication encryption key used for all TACACS+ communications between the
device and the TACACS+ daemon. Use the no form of the command.
Syntax
tacacs-server key key-string
no tacacs-server key
Parameters
•
key-string — Specifies the authentication and encryption key for all
TACACS+ communications between the device and the TACACS+ server.
This key must match the encryption used on the TACACS+ daemon. (Range:
0-128 characters)
Default Configuration
Empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication encryption key for all TACACS+
servers.
Console(config)# tacacs-server key enterprise