Cisco SPS2024 - Clear Gvrp Statistics

GVRP Commands
clear gvrp statistics
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 187
13
Example
The following example forbids dynamic registration of VLANs on Ethernet port 1.
Console(config)# interface ethernet 1
Console(config-if)# gvrp registration-forbid
clear gvrp statistics
The clear gvrp statistics Privileged EXEC mode command clears all GVRP
statistical information.
Syntax
clear gvrp statistics [ethernet interface | port-channel port-channel-number ]
Parameters
•
interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.