Ethernet Configuration Commands
clear counters
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 164
12
Example
The following example configures the speed at 100 Mbps.
Console(config)# interface ethernet 1
Console(config)# sfp speed 100 1
clear counters
The clear counters Privileged EXEC mode command clears statistics on an
interface.
Syntax
clear counters [ethernet
interface
| port-channel
port-channel-number
]
Parameters
•
interface
— Valid Ethernet port.
•
port-channel-number
— Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
