Cisco SPS2024 - Show Startup-Config

Configuration and Image File Commands
show startup-config
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 127
7
exit
interface range ethernet g(1-2)
switchport access vlan 2
exit
interface vlan 2
bridge address 00:00:00:00:00:01 ethernet g1
exit
interface ethernet g1
gvrp enable
exit
gvrp enable
interface ethernet g24
ip address dhcp
exit
ip name-server 10.6.1.36
console#
show startup-config
The show startup-config Privileged EXEC mode command displays the contents
of the startup configuration file.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode