GVRP Commands
show gvrp statistics
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 189
13
Example
The following example displays GVRP configuration information.
Console# show gvrp configuration
GVRP Feature is currently enabled on the device.
Timers (milliseconds)
Port(s) Status Registration Dynamic VLAN Join Leave Leave All
Creation
------ ------ ------------ ------------ ---- ----- ---------
e1 Enabled Normal Enabled 200 600 10000
e4 Enabled Normal Enabled 200 600 10000
show gvrp statistics
The show gvrp statistics Privileged EXEC mode command displays GVRP
statistics.
Syntax
show gvrp statistics [ethernet
interface
| port-channel
port-channel-number
]
Parameters
•
interface —
A valid Ethernet port.
•
port-channel-number
— A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
