Cisco SPS2024 - Spanning-Tree Mst Configuration

Spanning Tree Commands
spanning-tree mst configuration
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 385
28
spanning-tree mst configuration
The spanning-tree mst configuration Global Configuration mode command
enables configuring an MST region by entering the Multiple Spanning Tree (MST)
mode.
Syntax
spanning-tree mst configuration
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
All devices in an MST region must have the same VLAN mapping, configuration
revision number and name.
Example
The following example configures an MST region.
Console(config)# spanning-tree mst configuration
Console(config-mst)#