Cisco SPS2024 - Ip Source-Guard Binding

IP Source Guard Commands
ip source-guard binding
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 228
16
ip source-guard binding
The ip source-guard binding Global Configuration mode command configures the
static IP source bindings on the switch. Use the no form of this command to delete
static bindings.
Syntax
ip source-guard binding mac-address vlan-id ip-address {ethernet interface | port-
channel
port-channel-number }
no ip source-guard binding
mac-address vlan-id
Parameters
•
mac-address — Specifies a MAC address.
• vlan-id — Specifies a VLAN number.
• ip-address — Specifies an IP address.
• interface — Specifies an Ethernet port.
• port-channel-number — Specifies the Port-channel number.
Default Configuration
No static binding exists.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.