DHCP Commands
show ip dhcp snooping binding
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 139
8
Interface Trusted
---------------- ----------------
e1 Yes
e2 Yes
show ip dhcp snooping binding
The show ip dhcp snooping binding Privileged EXEC mode command displays the
DHCP snooping binding database and configuration information for all interfaces
on a switch.
Syntax
show ip dhcp snooping binding [mac-address
mac-address
] [ip-address
ip-
address
] [vlan
vlan-id
] [ethernet
interface
| port-channel
port-channel-number
]
Parameters
•
mac-address —
Specifies a MAC address.
•
ip-address
— Specifies an IP address.
•
vlan-id
— Specifies a VLAN number.
•
interface
— Specifies an Ethernet port.
•
port-channel-number —
Specifies the Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
